Journal Publications

1. Koutsougeras, C., Saadeh, M. and Fayed, A. (2021). "A Framework and Method for Analysis of Feed-Forward Industrial and Manufacturing Lines," Journal of Intelligent Manufacturing and Special Equipment, DOI: 10.1108/JIMSE-06-2021-0031

2. Saadeh, M. & Trabia, M. (2015). "Parameters Identification for a Composite Piezoelectric Actuator Dynamics," Actuators,4(1): 39-59.

3. Saadeh, M. (2014). "Synchronizing Bus Dispatching to Minimize Waiting Times at Transfer Nodes Using Genetic Algorithms,"Journal of Traffic and Logistics Engineering, 2(4): 248-254

4. Saadeh, M. & Trabia, M. (2012). "Identification of a Force Sensing Resistor for Tactile Applications," Journal of Intelligent Material Systems and Structures, JIMSS, 24(7): 813-827.

5. Ata, A., Faris, W. & Saadeh, M. (2012). "Dynamic analysis of a two-link flexible manipulator subject to different sets of conditions," Procedia Engineering, 41: 1253-1260..

6. Trabia, M., Yim, W. & Saadeh, M. (2011). "Modeling of Hysteresis and Backlash for a Smart Fin with a Piezoelectric Actuator," Journal of Intelligent Material Systems and Structures, JIMSS, 22(11): 1161-1176.

7. Faris, W., Ata, A. & Saadeh, M. (2009). "Energy Minimization Approach for a Two-link Flexible Manipulator," Journal of Vibration and Control, JVC, 15(4): 497-526.

8. Ata, A., Faris, W. & Saadeh, M. (2007). "Optimal Trajectory Selection for 3 DOF Planar Manipulator with Minimum Energy Consumption," International Journal of Applied Engineering Research, IJAER, 2(1): 45-63.

 

Conference Proceedings

1. Saadeh. M., Carambat, T. and Martinez, A. (2017). "Evaluating and Modeling Force Sensing Resistors for Low Force Applications," ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2017, No. 3703, Snowbird, Utah, USA

2. Thota, G., Saadeh, M., Trabia, M., OToole, B., Lee, C-H., Park, H-L., Koo, M-H., Woo, K-J., Lee, K-W. & Lee, K-H. (2012). "Material Characterization of Rubberized Aramid for Shock Mitigation," Proceedings of the 2012 International Mechanical Engineering Congress & Exposition IMECE2012, No. 88437, Houston, TX, USA.

3. Trabia, M. & Saadeh, M. (2012). "A Hybrid Master-Salve Genetic Algorithm-Neural Network Approach for Modeling a Piezoelectric Actuator," Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2012, No. 7925, Stone Mountain, GA, USA.

4. Saadeh, M. & Trabia, M. (2011). "Identification of a Force Sensing Resistor for Tactile Applications," Proceedings of the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2011, No. 5133, Scottsdale, AZ, USA.

5. Saadeh, M. & Trabia, M. (2010). "Development of a Measuring System of Contact Force for Braille Reading Using a Six-Axis Force Sensor," Proceedings of the 2010 International Mechanical Engineering Congress & Exposition IMECE2010, No. 39976, Vancouver, BC, Canada.

6. Trabia, M., Yim, W. & Saadeh, M. (2010). "Modeling of Hysteresis and Backlash within a Smart Fin with a Piezoelectric Actuator," Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2010, No. 3746, Philadelphia, Pennsylvania, USA.

7. Saadeh, M., Trabia, M., Shen, Y. & Fadali, M. (2010). "Design of a Wearable Haptic Braille Device," Proceedings of the 2010 Design of Medical Devices Conference DMD2010, No. 3873, Minneapolis, MN, USA.

8. Mudupu, V., Trabia, M., Yim, W. & Saadeh, M. (2008). "Modeling of a Piezoelectrically Actuated Smart Projectile Fin Hysteresis," Proceedings of the 3rd International Conference on Mechatronics ICOM 08, Kuala Lumpur, Malaysia, pp: 335-340.

9. Ata, AA. & Saadeh, M. (2006). "Soft Motion Trajectory for Planar Redundant Manipulator," International Conference on Control, Automation, Robotics, and Vision ICARCV, Singapore, pp. 1514-1519.

Mohammad Saadeh, Ph.D.

Publications

Department Head,

Associate Professor of Engineering Technology